Thinning shears for dogs take bulk out of a coat without leaving a cut line: the notched blade takes some hair and lets the rest slide past. Blending shears soften the edges other tools leave behind, straight shears cut the clean lines on legs, backs and skirts, and curved shears follow the round shapes of a head, chest and rear.
Most groomers buy their first shear on price and their second on regret. Here is what each type does on a coat, how length changes the job, and which combination covers a working table without buying twice.
What does each type of grooming shear do?
Straight shears
The straight shear is the one in your hand most of the day. It cuts flat planes: the side of a leg, a level topline, the bottom of a skirt, the line under a tail. Lay it along a comb or against the coat and it gives you a clean edge you can see.
Straight shears are also the easiest to check your own work with. A line cut straight either sits level or it does not, so new groomers learn shape faster with one.
Curved shears
A curved blade follows a round shape without twisting your wrist. Heads, topknots, cheeks, chests, rounded feet and the tuck-up behind the ribs all take fewer passes with a curve than with a straight shear held at an angle.
Curves come in gentle and strong. A softer curve is forgiving on general bodywork, a deeper curve suits head work and show trims where the shape is tight.
Thinning shears
Thinning shears have teeth on one or both blades, so each pass removes part of the hair in the gap and leaves the rest. Kenchii, whose shears we carry, defines a true thinning shear as one with two serrated edges. Use them to break up a clipper line, reduce weight in a heavy coat, soften the join between body and leg, and tidy the edge of an ear.
Blending shears
Blenders have fewer, wider teeth, so they move more hair per pass than a thinner. Kenchii's own guidance warns that blenders take out more coat than thinners, so bulk thinning with one needs a light hand.
Chunkers
Chunkers are the heavy option. Kenchii describes them as mainly for shaping heavy curls quickly without leaving the coat uneven, which is why doodle and poodle salons reach for them. We carry the Artero ONE Chunkers 27T 7", including a left-handed version.
How do you tell a thinner from a blender?
Read the tooth count, not the word on the box. Brands name these tools differently, and the same shear can be sold as a thinner by one maker and a blender by another.
On the Kenchii Scorpion line we stock, the thinner has 46 teeth and the blender has 24. That gap tells you everything: more teeth with narrower gaps take a little hair in many places, which is what you want for finishing. Fewer, wider teeth take more hair in fewer places, which is what you want for removing weight.
A simple way to hold it in your head:
| Job on the table | Reach for |
|---|---|
| Erasing a clipper line or a scissor mark | Thinner, high tooth count |
| Taking weight out of a thick double coat | Blender or chunker |
| Softening the transition from body to leg | Thinner |
| Shaping a dense curly coat fast | Chunker |
| Finishing ear edges and furnishings | Thinner, used tip first |
Straight or curved: which one for the dog in front of you?
Coat and shape decide it, not preference. A terrier trim with flat planes and hard lines is straight shear work. A round head on a doodle, a beveled foot, a rounded chest on a bichon is curved shear work.
Most working groomers own both in the same length and swap mid-groom. If a salon can only buy one to start, a straight shear is the safer first purchase because it does rough shaping as well as finishing. The curve pays for itself the first week someone books in a head trim.
Left-handed groomers should buy left-handed shears rather than reversing a right-handed pair. The Kenchii ShowGear Supreme range includes left-handed straight and curved shears, so a two-stylist salon can kit both tables from the same line.
What size grooming shear should a salon buy?
Length is about the dog and the hand, not about skill.
- 5.5 to 6.5 inch ball tip: faces, feet, sanitary areas and wriggly puppies. The rounded tip is the safety feature. Kenchii's Happy Puppy line includes a 5.5 inch ball tip shear.
- 7 inch: detail work, small breeds, and groomers with smaller hands. Kenchii's Five Star Offset line runs a 7 inch curved shear, and the Scorpion line a 7 inch straight.
- 8 inch: the all-rounder. If a table gets one straight and one curved shear, 8 inch is the usual pair.
- 9 inch: speed on big coats. A 9 inch straight covers a standard poodle leg or a large double coat in fewer strokes, but it is heavy work in a small hand.
Handle shape matters as much as length. An offset handle sits the thumb lower than the finger ring, which lets the shoulder drop and the wrist stay straighter through a long day of scissoring.
What should a new grooming table start with?
Three shears cover almost everything: an 8 inch straight, an 8 inch curved, and one thinner. Add a blender when the salon starts taking heavy coats, a chunker when curly breeds fill the book, and a ball tip pair when puppies do.
Buying a set is the shortcut. The Kenchii ShowGear Supreme 8 inch shear set is one order instead of three, is made from Japanese alloy steel, and comes with an oiler and a ring insert so the grip can be sized to the hand using it. Left-handed groomers can order the same set in a left-handed version.
Whatever route a salon takes, buy the steel once. A cheap shear folds hair instead of cutting it, and the time lost going over the same leg twice costs more than the shear saved.
Browse the full blades and shears range to compare straight, curved, thinner and blender options side by side, or go straight to the Kenchii pro grooming and Artero grooming tools lines. Pet Palette lists free shipping at just $129 and no order minimums, so a salon can order a single shear or restock the whole table in one go.
How do you keep a shear sharp for longer?
Shears lose their edge to grit and neglect more often than to use.
- Wipe the blades down after every dog, not at the end of the day. Hair and shampoo residue sit in the pivot and dull the edge.
- Put a drop of oil at the pivot and open and close the shear a few times before storing it.
- Check tension weekly. Hold the shear open at a right angle and let one blade fall: it should close most of the way and stop. Too loose folds hair, too tight wears the edge.
- Never cut a damp or dirty coat with your finishing shears. Keep an older pair for rough work.
- Store shears in a case, not loose in a drawer where blades knock together.
A good shear comes back from sharpening many times. A shear that has been dropped on a tile floor usually does not.
Common questions about grooming shears
Can you groom a dog with ordinary scissors?
No. Craft and kitchen scissors have thick, beveled blades that push hair rather than slice it, and they have pointed tips next to skin that moves. Grooming shears are honed for hair and come with ball tips for the areas where a dog is most likely to flinch.
How do you thin a thick coat without leaving marks?
Work with the lay of the coat, not across it, and cut well away from the skin. Take one pass, comb through, look, then decide whether to take another. Marks come from cutting in the same place twice before combing out what you already removed.
Are thinning shears worth it for a busy salon?
They save more time than they cost. A thinner turns a visible clipper line into a finished edge in seconds, and that single use is what stops a groom going back on the table. Our pro grooming catalog carries them alongside the blades, combs and finishing tools that do the rest of the job.
Stocking up on grooming tools? Set up a Pet Palette wholesale account to see pricing and order online. Keep reading: how to sharpen dog clippers and when to replace the blade.
